350 Ton x 14' Cincinnati CB350 Press Brake, 1983

Description

350 Ton x 14' Cincinnati CB350 Press Brake, 1983
350 Ton x 14' Cincinnati CB350 Press Brake, 1983
We are pleased to offer the following for your consideration:
Machine Type:
Hydraulic Press Brake - Fab
Make:
Cincinnati
Model:
CB350 x 14'
Year:
1983
SPECIFICATIONS
Overall length of bed: 14'
Distance between housings:12'6"
Equipped with dual palm buttons and foot pedal control.
Bed plate requires a small pit approximately 12” deep.
Brake is not equipped with any back gauge.
Bending capacitiy in Mild Steel: 3/8” x 12' 5”
1/2” x 12';
5/8” x 8'6”
Full tonnage at low or medium speed: 350 Tons
Tonnage in high speed: 140 Tons
Standard stroke length: 10”
Throat clear from center of dies: 10”
Open height: 18”
Closed height: 8”
Ram speed, high speed: 65 IPM
Medium speed: 33 IPM
Low speed: 9 IPM
Return speed: 67 IPM
Motor H.P.: 30
Approx. Dimensions:x 14'6” L x 72” W x 11'2” H
Approximate weight: 44,000 Lbs.
Electrics: 480 Volt, 3 phase
Equipped With:
Die holder
4-Way Die
1 Full Length Top Punch
Ram is machined for angle brackets
*** As of March 1 new seals have been put in the brake****
Due to eBay's policy we do not have our contact information listed. The only way we can communicate with you is through the
Buy It Now
button.
Revelation Machinery encourages first-hand inspection of all used machinery.This machine is being sold "AS IS, WHERE IS" This is a used machine that is UNDER POWER and Available for Inspection. Please verify all of the specs listed for this machine. The Seller does not guarantee or warranty expressed or implied these specs to be accurate. It is the buyer's responsibility to confirm all specs and to make sure that this machine is the right machine for them. List prices are not inclusive of rigging or shipping charges.
Listing and template services provided by inkFrog